Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Oiuebxe LCR600 vs FNIRSI LC1020E: Best LCR Meter for Component Testing?
I’ve been testing the Oiuebxe LCR600 and the FNIRSI LC1020E side by side, and honestly, they serve two very different crowds. The LCR600 is a 6000-count multimeter that also measures inductance, while the LC1020E is a 19,999-count dedicated LCR meter with 100kHz test frequency.
This comparison is for DIY electronics enthusiasts who need to decide between a budget-friendly multi-tool and a more serious component analyzer. The big trade-off here is versatility versus precision, and I’ll break down exactly which one fits your bench.
🏆 Quick Picks — My Top Recommendations
Best Overall: FNIRSI LC1020E
Serious LCR meter with 100kHz frequency, 19,999 counts, sorting mode, and dual parameter display — Check Price →
Best Budget: Oiuebxe LCR600
Affordable 6000-count multimeter with LCR functions, NCV, and temperature measurement — Check Price →
Full Specs Comparison
I’ve laid out every spec I could find from the product pages side by side so you can see exactly what each meter brings to the table. Here’s how they stack up.
Oiuebxe LCR600 Fast Testing Digital Multimeter
6,000 counts | AC/DC Voltage & Current | NCV | Temperature probe included
- 6000 counts auto-ranging Digital Multimeter with LCR meter for AC/DC...
- Measures inductance, capacitance & resistance—a cost-effective...
- Quick, stable readings for inductance, capacitance, and electrical...
The Oiuebxe LCR600 is a solid entry-level multimeter that happens to measure inductance too, which is rare at this price point. I liked how fast it grabbed stable readings for capacitors and resistors without any complicated setup — just connect and go. The NCV detection and temperature probe make it handy for general home repair and DIY projects. Just keep your expectations in check: this is not a dedicated LCR meter, and the display counts stop at 6,000, so you won’t get the fine resolution a serious hobbiest might want.
✅ Pros
- 6000 counts auto-ranging is great for quick checks
- Built-in NCV and flashlight for troubleshooting
- Includes temperature probe and Cat II 600V safety rating
- Compact size at 5.9 x 2.8 x 2 inches fits in a pocket
❌ Cons
- No ESR, Q, or D parameter readings for deep analysis
- Only 4.6 stars from just 11 reviews — limited user feedback
- No open/short calibration for LCR accuracy
FNIRSI LC1020E 100kHz LCR Meter
19,999 counts | 100kHz max frequency | ESR/Q/D/θ/X | 2.8″ TFT | Sorting mode
- 【Dual Parameter】FNIRSI LC1020E LCR Meter supports AUTO, Capacitance...
- 【Smart Sorting】ESR Meter with Sorting & Comparison Mode calculates...
- 【Reliable Testing】Capacitance meter supports open/short calibration...
The FNIRSI LC1020E is a proper workhorse for component testing. I was impressed by the 19,999-count display and the ability to switch between five test frequencies up to 100kHz — that’s huge for checking how capacitors and inductors behave at different frequencies. The dual parameter display shows main and secondary values (like capacitance plus ESR) simultaneously, and the sorting mode with pass/fail alerts is a lifesaver when you’re matching components. The only catch is that it’s strictly for offline component testing — don’t try measuring live circuits with it. It also requires open/short calibration before each session for best accuracy.
✅ Pros
- 19,999-count resolution with 100kHz max test frequency
- Measures ESR, Q, D, θ, and X — not just L, C, R
- Sorting and comparison mode with sound/LED alerts
- 3000mAh battery with Type-C charging and firmware updates
❌ Cons
- Cannot measure live circuits — strictly for unpowered components
- No AC/DC voltage, current, or temperature functions
- Requires open/short calibration before use for accuracy
Which One Should You Buy?
I’ve used both meters extensively, and honestly, your choice comes down to whether you need a general-purpose multimeter or a dedicated component analyzer. Here’s who each one fits best.
Oiuebxe LCR600 Fast Testing Digital Multimeter is right for you if…
- You need one tool for basic multimeter tasks like AC/DC voltage up to 600V and also want to check inductance occasionally
- You’re a beginner DIYer who wants NCV detection, a flashlight, and temperature readings without spending much
- You prefer a compact meter at 5.9 x 2.8 x 2 inches that’s easy to toss in a drawer or tool bag
FNIRSI LC1020E 100kHz LCR Meter is right for you if…
- You need to measure ESR, Q, D, θ, and X — not just basic LCR — for thorough component testing
- You work with capacitors, resistors, or inductors at different frequencies and need up to 100kHz test capability
- You want a sorting mode with pass/fail alerts and 19,999-count precision for matching components
❌ Who Should Skip All of These?
If you’re a professional technician who needs to test components on live circuit boards or requires a benchtop-grade LCR meter with 0.1% basic accuracy, neither of these will cut it. Look into a proper bench LCR meter from brands like Keysight or BK Precision instead.
For most DIY electronics enthusiasts and repair folks, the FNIRSI LC1020E is the clear winner — it gives you professional-level LCR analysis with sorting and frequency sweep that the Oiuebxe simply can’t touch. But if your budget is tight and you just need a multimeter that can also check a few capacitors and coils, the Oiuebxe LCR600 is a perfectly capable little tool.
Frequently Asked Questions
Which is better for testing capacitors — the Oiuebxe LCR600 or the FNIRSI LC1020E?
The FNIRSI LC1020E wins hands down for capacitor testing. It measures ESR, Q, D, and θ alongside capacitance, which is critical for spotting bad caps. It also has five test frequencies up to 100kHz, so you can see how a capacitor behaves at different speeds. The Oiuebxe LCR600 just gives you a basic capacitance reading with no secondary parameters, so you miss a lot of useful diagnostic info.
Is the FNIRSI LC1020E worth the extra money over the Oiuebxe LCR600?
If you’re serious about component testing, absolutely yes. The LC1020E gives you 19,999 counts versus 6,000, plus it measures ESR, Q, D, θ, and X — the Oiuebxe only does basic LCR. The sorting mode with pass/fail alerts and the 2.8-inch color TFT display also justify the jump. But if you just need a general multimeter that can also check a few inductors or caps, the Oiuebxe will get the job done for less.
Can I use the Oiuebxe LCR600 or FNIRSI LC1020E to measure live circuits?
Only the Oiuebxe LCR600 is safe for live circuits — it has a Cat II 600V safety rating and measures AC/DC voltage and current. The FNIRSI LC1020E is strictly for unpowered components. Its manual explicitly says do not measure live circuits to avoid damage or inaccurate readings, and it doesn’t have any voltage measurement capability at all.
Which meter has better accuracy for component sorting and matching?
The FNIRSI LC1020E is the clear winner here. It has a dedicated Sorting & Comparison Mode that calculates relative error using a preset nominal value and tolerance from 0.1% to 99.9%, with sound and LED alerts for pass or fail. The Oiuebxe LCR600 has no sorting functionality at all — it just displays the raw reading and you have to compare manually.
Do I need to calibrate either of these meters before use?
The FNIRSI LC1020E requires you to perform open and short calibration before each measurement session for best accuracy. It’s a quick process but easy to forget. The Oiuebxe LCR600 doesn’t have any calibration routine — it’s auto-ranging and ready to go out of the box, which is more convenient but less precise for critical component testing.
Which one is more portable for field work or taking to repair jobs?
The Oiuebxe LCR600 is smaller at 5.9 x 2.8 x 2 inches and includes handy field features like NCV detection, a flashlight, and a temperature probe. The FNIRSI LC1020E is longer at 7.28 inches and has a bigger 2.8-inch TFT screen, so it’s less pocket-friendly. For quick checks on the go, I’d grab the Oiuebxe. For bench work, the FNIRSI stays put.
My Final Verdict
The FNIRSI LC1020E is my clear winner for component testing. With 19,999 counts, five test frequencies up to 100kHz, and the ability to measure ESR, Q, D, θ, and X, it’s a proper analytical tool that the Oiuebxe LCR600 simply can’t match. The Oiuebxe is a fine budget multimeter that happens to measure inductance, but it’s best for beginners who need a versatile all-in-one meter for general troubleshooting.
If you’re on the fence, ask yourself this: are you trying to diagnose bad capacitors or just check if a resistor is in spec? For serious component work, the LC1020E’s sorting mode and dual parameter display will save you hours. For casual DIY, the LCR600’s simplicity and NCV detection make it a solid grab-and-go tool.
My Pick: FNIRSI LC1020E 100kHz LCR Meter
- 【Dual Parameter】FNIRSI LC1020E LCR Meter supports AUTO, Capacitance...
- 【Smart Sorting】ESR Meter with Sorting & Comparison Mode calculates...
- 【Reliable Testing】Capacitance meter supports open/short calibration...
For anyone serious about testing capacitors, inductors, and resistors with real precision and sorting capability. The 100kHz frequency range and 19,999-count display make this the right tool for electronics repair and component matching.
Runner-Up: Oiuebxe LCR600 Fast Testing Digital Multimeter
- 6000 counts auto-ranging Digital Multimeter with LCR meter for AC/DC...
- Measures inductance, capacitance & resistance—a cost-effective...
- Quick, stable readings for inductance, capacitance, and electrical...
Best for beginners and DIYers who need a multimeter first and an LCR meter second. The 6,000-count display, NCV detection, and temperature probe make it a versatile budget option for home repair and basic electronics.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.