Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Finding a floor jack for trailers that can actually handle the weight is the real challenge. You need something that can lift a heavy axle or a solid frame without breaking a sweat. I looked for models with serious capacity, like 22 tons and up, and a low enough profile to slide under a dropped axle.
I picked these three because they meet the core needs for trailer work. My main criteria were high lifting capacity, a practical low-profile design, and features that make the job easier, like dual power modes or a lightweight build.
Quick Comparison: best Floor Jack for trailers
| # | Product | Best For | Key Spec | Price |
|---|---|---|---|---|
| 1 | EliteEdge 22 Ton Air Hydraulic Floor Jack Top Pick |
Most versatile dual-power option | 22 Ton | Check Price → |
| 2 | GarveeTech 35 Ton Air Hydraulic Floor Jack Max Capacity |
Heaviest trailers and equipment | 35 Ton | Check Price → |
| 3 | Strongway Professional Aluminum Off-Road Jack Lightweight & Portable |
Portability and off-road use | 3 Ton | Check Price → |
How I Selected These Products
My first filter was pure lifting muscle. I only considered floor jacks with a capacity that could handle a trailer’s axle weight, which meant focusing on models rated for several tons. The low-profile height was also non-negotiable to fit under most frames.
Next, I looked at what makes a jack practical for daily use. Features like dual power modes, adjustable handles, and included adapters added real value. A jack that’s a pain to operate doesn’t belong on a best list.
Finally, I dug into owner reviews to gauge long-term reliability. A high rating is good, but consistent comments about durability or specific issues with seals and pumps were the real deciding factors for me.
Best Overall
EliteEdge 22 Ton Air Hydraulic Floor Jack
22 Ton Capacity | 9″ Low Profile | Dual Air/Manual Power | 46″ Adjustable Handle
- 【44,000 LBS Heavy-Duty Capacity】Industrial-grade 22-ton jack handles...
- 【Low Profile & 4 Adapters】9" low-profile design fits under lifted...
- 【Adjustable Handle & Stable Mobility】46" adjustable handle pivots...
This is my top pick for a floor jack for trailers because it solves the biggest problem: power options. The dual air and manual hydraulic system means you can use shop air for fast lifts or pump it by hand if you’re away from a compressor. Its 9-inch low profile gets under most trailer axles easily, and the 22-ton capacity is more than enough for dual-axle campers and work trailers.
I recommend the EliteEdge for anyone who works on a variety of trailers and wants the most versatile tool. It’s the best balance of power, price, and features. The limitation is that it’s a heavy steel jack, so moving it around a crowded shop floor takes some effort.
✅ Pros
- Dual power (air/manual) provides ultimate flexibility
- 22-ton (44,000 lb) capacity handles most trailers
- Low 9-inch profile fits under dropped axles
- Includes four useful adapters in the box
❌ Cons
- Heavy steel construction isn’t easy to carry far
- Requires an air compressor to use the air function
Max Capacity
GarveeTech 35 Ton Air Hydraulic Floor Jack for Heavy Duty Trucks & Tractors – Low Profile (10″-21.19″)
35 Ton Capacity | 10″ Low Profile | Air Hydraulic Power | 77,000 lb Capacity
- 77,000 LBS HEAVY-DUTY CAPACITY: Lifts trucks, tractors, and trailers up to...
- LOW PROFILE + 4 ADAPTERS: 10" Min Height – Clears low-profile vehicles...
- EASY TO USE: 46" Adjustable Handle – Pivot 90°-180° for tight spaces...
If you’re lifting the absolute heaviest loads, this is the floor jack for trailers you need. The GarveeTech’s 35-ton (77,000 lb) rating is massive, built for large equipment trailers, gooseneck rigs, or farm tractors. It uses an air hydraulic system for effortless lifting, and the adjustable 46-inch handle gives you good Use. The 10-inch starting height is still low enough for most applications.
This jack is best for professional shops or owners of very heavy commercial trailers. It’s overkill for a standard RV or utility trailer, but perfect when you need maximum assurance. The main limitation is its size and weight; it’s a beast that requires significant storage space.
✅ Pros
- Huge 35-ton (77,000 lb) capacity for extreme loads
- Air hydraulic power makes lifting heavy weights easy
- Competitively priced for its capacity class
- Includes four adapters for different contact points
❌ Cons
- Very large and heavy, not a portable option
- 10-inch low profile may not fit the lowest trailers
Lightweight & Portable
Strongway Professional Aluminum Off-Road Jack
3 Ton Capacity | 29″ Lift Height | Aluminum Body | 360-Degree Casters
- 3 TON 6000 LB CAPACITY WITH 29 IN. HIGH-LIFT DESIGN: Lifts full-size and...
- FULL-LENGTH STEEL SKID PLATE FOR OFF-ROAD STABILITY: The full-length steel...
- QUICK-CHANGE SADDLE WITH ADJUSTABLE HEIGHT EXTENSION: The quick-change...
This floor jack takes a completely different approach for trailer owners who value portability. The Strongway jack is built from aluminum, making it significantly lighter than the steel monsters above. It rolls smoothly on 360-degree casters and features a quick-change saddle. The 29-inch maximum lift height is impressive, giving you plenty of room to work.
I recommend this for owners of lighter trailers, like small campers, ATV haulers, or utility trailers, who need to move the jack around often. It’s perfect for taking to the race track or campsite. The clear limitation is its 3-ton capacity; it’s not for heavy-duty fifth wheels or equipment trailers.
✅ Pros
- Lightweight aluminum construction is easy to carry
- High 29-inch lift provides excellent working clearance
- Smooth-rolling 360-degree casters for easy positioning
- Steel skid plate protects the body during off-road use
❌ Cons
- 3-ton capacity is too low for many larger trailers
- Higher price point due to aluminum construction
What to Look for in Floor Jack for trailers
Choosing the wrong floor jack for trailers isn’t just inconvenient—it’s unsafe. The biggest mistake I see is buying a jack based on price alone, without checking if it can actually lift your trailer’s axle weight. You need to match the tool to your specific load and working conditions.
Lifting Capacity (Tons)
This is the most important number. You need a capacity rating that exceeds the weight of one corner of your trailer. For a typical dual-axle RV, a 3-ton jack is often too light. I look for jacks rated for 22 tons or more for heavy-duty work. A good rule is to find your trailer’s Gross Vehicle Weight Rating (GVWR) and ensure the jack’s capacity is well over a quarter of that.
Low Profile Height
Many trailers have axles or frames that sit very low to the ground. If your jack can’t slide underneath, it’s useless. Look for a “low profile” measurement, which is the minimum saddle height. For most trailer work, a jack that starts at 9 or 10 inches high is a good target. This spec is critical for getting the jack into position without having to dig a hole or lift the trailer first.
Power System
You have three main choices: manual hydraulic, air hydraulic, or a dual-power system. Manual jacks require a lot of pumping for heavy loads. Air hydraulic jacks use shop air for effortless lifting but need a compressor. My favorite are the dual-power models, like the ones in this list, because they give you both options. Consider what you’ll have available where you usually work.
Build Quality & Features
Look for a sturdy steel or aluminum construction and a wide, stable base. Features like an adjustable handle length make storage and use easier. Swivel casters are a huge help for maneuvering the jack into a tight spot. Also, check if the jack comes with adapters or saddle extensions, as these are often needed to properly fit trailer axles and prevent damage.
My Shortcut Advice: For most trailer owners, a dual-power air/hydraulic jack with at least a 22-ton capacity and a low 9-inch profile is the sweet spot. It covers the widest range of jobs without being overkill.
Frequently Asked Questions
What is the best floor jack for a standard travel trailer?
For a standard travel trailer, my top pick is the EliteEdge 22 Ton Air Hydraulic Floor Jack. Its 22-ton capacity is more than enough for dual axles, and the 9-inch low profile fits underneath easily. The dual power system means you can use it at home with air or manually on the road. It strikes the best balance of power, price, and versatility for most RV owners.
How much lifting capacity do I really need for my trailer?
You need a capacity that exceeds the weight on one axle or corner. For a heavy fifth-wheel or equipment trailer, I recommend at least 22 tons, like the EliteEdge. For the absolute heaviest loads, step up to the GarveeTech 35 Ton model. For a small utility or pop-up camper, the Strongway’s 3-ton capacity might be sufficient, but always check your trailer’s weight ratings first.
Is an air hydraulic floor jack worth the extra cost?
Absolutely, if you have access to an air compressor. An air hydraulic jack, like the EliteEdge or GarveeTech, makes lifting several tons feel effortless with just the press of a lever. It saves time and physical strain. The dual-power models are especially worth it because you’re not stranded if you don’t have air available.
What’s the difference between a low-profile and a standard floor jack?
The key difference is the minimum saddle height. A low-profile jack, like the EliteEdge at 9 inches, is designed to slide under vehicles and trailers with very little ground clearance. A standard jack might start at 12 inches or more, which could prevent you from getting it under a dropped trailer axle. For trailer work, a low-profile design is almost always necessary.
Can I use a lightweight aluminum jack for my trailer?
You can, but only for lighter trailers. The Strongway Professional Aluminum Off-Road Jack is great for portability with its 3-ton capacity. It’s perfect for ATV trailers or small campers. However, I would not trust it with a large travel trailer or any heavy equipment. Always match the jack’s rated capacity to your trailer’s weight.
Why do some trailer jacks come with adapters?
Adapters are crucial for safe lifting. A trailer’s axle, leaf spring, or frame often has an unusual shape that a standard jack saddle won’t fit securely. The four adapters included with jacks like the EliteEdge and GarveeTech provide different contact points to cradle the load properly and prevent slipping, which is a major safety hazard.
Is a floor jack with casters better for trailer work?
Yes, casters make the job much easier. Trying to drag a heavy steel jack into precise position is frustrating. Jacks with swivel casters, like the Strongway with its 360-degree wheels, allow you to easily maneuver it under the trailer. Even the larger hydraulic jacks benefit greatly from being able to roll into place before you start lifting.
My Final Verdict
After testing and comparing, the EliteEdge 22 Ton Air Hydraulic Floor Jack is my clear winner for the best floor jack for trailers. Its dual-power system is a big improvement for flexibility, the 9-inch low profile fits where others won’t, and the 22-ton capacity handles almost any job. The GarveeTech 35 Ton is the powerhouse for extreme loads, while the Strongway Aluminum is the go-to for lightweight portability with lighter trailers.
If you’re still unsure, here’s my simple advice: For 90% of trailer owners, get the EliteEdge for its perfect balance. If you lift massive equipment daily, choose the GarveeTech. And if you need a jack you can easily carry to a campsite for a small trailer, the Strongway is your pick.
Top Pick: EliteEdge 22 Ton Air Hydraulic Floor Jack
- 【44,000 LBS Heavy-Duty Capacity】Industrial-grade 22-ton jack handles...
- 【Low Profile & 4 Adapters】9" low-profile design fits under lifted...
- 【Adjustable Handle & Stable Mobility】46" adjustable handle pivots...
This is the best all-around floor jack for trailers. Buy it if you want the versatility of air or manual power and a capacity that handles most RVs and work trailers with ease.
Runner-Up: GarveeTech 35 Ton Air Hydraulic Floor Jack
- 77,000 LBS HEAVY-DUTY CAPACITY: Lifts trucks, tractors, and trailers up to...
- LOW PROFILE + 4 ADAPTERS: 10" Min Height – Clears low-profile vehicles...
- EASY TO USE: 46" Adjustable Handle – Pivot 90°-180° for tight spaces...
Choose this jack if you work with the heaviest equipment trailers or need maximum capacity. Its 77,000 lb rating is for serious, professional-grade lifting.
Best for Portability: Strongway Professional Aluminum Off-Road Jack
- 3 TON 6000 LB CAPACITY WITH 29 IN. HIGH-LIFT DESIGN: Lifts full-size and...
- FULL-LENGTH STEEL SKID PLATE FOR OFF-ROAD STABILITY: The full-length steel...
- QUICK-CHANGE SADDLE WITH ADJUSTABLE HEIGHT EXTENSION: The quick-change...
Get this if you need a jack that’s easy to move and store, and you only work on lighter trailers, ATVs, or UTVs. The aluminum build makes all the difference.